JCD 1 set Host Full Set Screw Sets Replacement for Nintend 3DS | Электроника
189,24 руб.
Новое поступление
Характеристики
*Текущая стоимость уже могла изменится. Что бы узнать актуальную цену и проверить наличие товара, нажмите "Добавить в корзину"
| Месяц | Минимальная цена | Макс. стоимость | Цена |
|---|---|---|---|
| Mar-22-2026 | 0.22 руб. | 0.78 руб. | 0 руб. |
| Feb-22-2026 | 0.73 руб. | 0.88 руб. | 0 руб. |
| Jan-22-2026 | 0.91 руб. | 0.18 руб. | 0 руб. |
| Dec-22-2025 | 0.6 руб. | 0.20 руб. | 0 руб. |
| Nov-22-2025 | 0.16 руб. | 0.58 руб. | 0 руб. |
| Oct-22-2025 | 0.59 руб. | 0.59 руб. | 0 руб. |
| Sep-22-2025 | 0.57 руб. | 0.3 руб. | 0 руб. |
| Aug-22-2025 | 0.51 руб. | 0.69 руб. | 0 руб. |
| Jul-22-2025 | 0.96 руб. | 0.19 руб. | 0 руб. |
Описание товара


...
...

...
Product Description
CC2530 ZIGBEE module SZ3, plus PA, wireless transceiver modules, wireless sensor networks, WSN
...
One, SZ3 Module Features Transmit power 20dBm; receiving sensitivity -104dBm (BER = 10-2) Opening band, no need to apply frequency, carrier frequency 2.4GHz. High anti-interference ability and low error rate Based QPSK modulation, high-efficiency forward error correction channel encoding technology to improve the data's resistance to burst interference and random interference. Uses Direct Sequence Spread Spectrum technology, effective anti-same frequency narrowband interference. Comes with 16-bit CRC, effective error detection. Air transmission rates up to 250kbps. Transmission distance, under open conditions, the transmission distance is 1600m; Low power consumption, can be easily controlled to a low-power mode; Small size, light weight. Using SOC, peripheral circuits, high reliability, and low failure rate. Provide the PCB antenna, IPEX antenna connector blocks and other antenna connections. Adaptation 2.4GHz IEEE 802.15.4 and ZigBee protocol application, automatic networking. 3.1zigbee open floor Introduction Zigbee floor is in line with the Company CC2530 Zigbee modules and R & D base plate, External power supply: Input range: + 3.3V ~ + 6V DC; If you do use the USB power supply, the entire output current <350mA; Power select jumper is used to select an external power supply or USB power, but when using the emulator power, this jumper should be left vacant, USB and external power supply can not choose, but should only choose the emulator power jumper; DEBUG signal sequence is as follows :( interface referred to as a small triangular feet) (1) GND (2) + 3.3V (3) DC (4) DD (5) P1_4 (6) P1_5 (7) RESET_N (8) P1_6 (9) NC (10) P1_7 Emulator power jumper is used when connecting to the emulator, the emulator for the backplane supply, then the emulator jumper jump to "ON", but must be left open power supply selection jumper, if you use an external power supply or USB power, this jump lines must skip "OFF"; Serial selection jumper, PC using the USB connection to transfer data, both jumpers Skip "USBxx", when using RS232, two jumpers Skip "232xx"; If you use the RS485 interface, you need to skip two jumpers are "485xx"; default 485 is unavailable, the customer if the use, RS485 interface to customize LED jumper is used when the LED control pin to be used to do other functions, disconnect and LED connections; Button is used to debug the program or with the Zigbee protocol stack manual binding. Note: Because SZ3 pin backplane pins and zigbee development is inconsistent with adapter plate needs to be used, the next picture shows the adapter plate pictures, SZ3 module for procurement and customer needs zigbee floor, we will free gift adapter plate
...
Welcome to our shop, enjoy the shipping here, you can
Смотрите так же другие товары: