Liitokala Lii-260 18650/26650/16340 Lithium Battery Charger Detection Capacity/ Internal Resistance / Voltage | Электроника

Liitokala Lii-260 18650/26650/16340 Lithium Battery Charger Detection Capacity/ Internal Resistance / Voltage | Электроника

Dear buyer, hello, the goods goods order has been included in the product price, we will send orders to the site registered in Singapore, the order time of arrival according to the logistics company, we do not do detailed instructions!grocery list:1. Liitokala Lii-260 charger 1 PC.（ This link does not include the adapter, if you need matching adapter, please buy this link! Thank you.）Engineer lii-260 instructions for use, A warning1.1 charger only serve as a lithium-ion battery is cylindrical.1.2 Before use, please carefully Operating Instructions, Notice battery charge current is recommended, not recommended higher than the charge current.1.3 Do not use other / AC / DC adapter.1.4 Battery charge-discharge device may be fever, not noticing burns.1.5 Stop deleting the AC power supply.1.6 can only be used in the usual room.Second, Features2.1 set up two types of charge current (500mA / 1000mA).2.2 may be different specifications (18650/26650) to charge the battery at the same time.2.3 each battery charge LCD display provides parameter2.4 mode, various charging current.2.5 Dischareger mode (the first full electric discharge again), detection of the battery capacity.2.6 Charger and Dischareger two models can be done simultaneously.2.7 EVERY battery available or autocephalous / charge power detection function is set.2.8 different display mode, current (MA) / Capacity (mAh) / Voltage (V) / Time (H) / Resistance (MR).2.9 to 30 mm / DC AC AC adapter.Three keys (mode) Description3.1 The charger has two buttons control Scranton, short useful3.2 In any case the key MODE and hold for 3 seconds to change the charger (FREE) mode or discharege (detection capacity) mode, then 8 seconds to play the flute to change the current again, the current 8 selected seconds, in the light of press (mode) key, View (MA) / capacity (mAh) / voltage (V) / time (H) / resistance (MR).Four mode4.1 mode (charging mode)4.1. 1 switching power supply charger when charger All LCD soluble full bright, if not put in the show Null, if the battery is put in a poor display NULL.4.1. 2 When the battery charger in rslite, Charger 3 seconds measured resistance of the battery, after the system automatically enter the charge current selected mode screen in & ldquo. Ma & RAQUO. -Gremel 8 seconds flicker, the period may be a key mode Selecting mA or 1000 mA charge current, in 8 seconds after your choice lock the charging current, if in 8 seconds, do not set, so the automatic mA charge current, current at this time is not change, if you want to change, reset the battery needed.4.1. 3 user must advertent battery Maximum charge current, If you need a quick charge, we recommend 500mA charge, This is the safest and also the battery for the cheapest4.1. 4 Charging Mode Through mode Gently press key can switch to view the charge the battery (mAh) / charging time (H) / battery resistance (the MR) / charging current (MA), 4 types, BatteryCharge full after will seem full, Undermost number little word display free (free).4.2 in the discharge mode (the ability to detect mode)4.2. 1 discharge mode, then put in a low-battery detection and recording of battery discharge, thereby coulant capacity automatically when the battery is full.4.2. 2-battery put in the definition of resistance after the battery charger, arbitrary state in long mode key, press 3 in the second discharge discharge modelIn the category - after the treatment, there are & ldquo. Ma & RAQUO. -Gremel 8 seconds flicker, the period may be a key mode Selecting mA or 1000 mA, in 8 seconds after your selection is disabled if in 8 seconds, do not set, then the system will automatically lock mA battery charge current (current this time charging system current).When the battery is full after the system automatically mA battery discharge current and record the battery discharge, thereby detecting the battery capacity When appears on the screen when discharher and Capacitance Screen models the end of indemnifiable screen flickering electricity parameter for the actual capacity of the battery. .-capacity Detection mode after the end of, the Charger will be before the current features selected again to charge the battery, Sufficienty yet.Five. Specific parameters5.1: Input voltage 12V / 1.5A5.2 Lithium battery Charging current: 2x (4.2 in 500mA), 2x (4.2 in 1000mA)5.3 can charge Pool: Specification 18650, 26650, and so on..5.4 Termination: Smart Power MonitorForm: 5.5 mm measuring 132 (long) * 65 mm (width) * 31 mm (high)Joint connector adapter to put in the battery:1 . Display battery internal resistance2. 500MA / 1000mA Charging current optional3. battery voltageCharger: modePress switch 1 for: how many rushed into the battery capacityPress the switch for 3: resistance of the battery (for reference only)Discharge: Press the mode switch 3 in the second mode of detection capability, Lobulation condensive current 500MA / 1000mA amount of additional (Need 8 Temple choice Capacity condensive points)Press switch 1 for: splitting capacity batteryPress switch 2 for: it is necessary to display the time points foundationsPress the switch 3 floor: resistance