Portable Multi-purpose Manual Oil Pump Hand Tube Car Hose 200CC Liquid Transfer Sucker Suction Inflatable | Автомобили и

Portable Multi-purpose Manual Oil Pump Hand Tube Car Hose 200CC Liquid Transfer Sucker Suction Inflatable | Автомобили и

Features:
Compact
Compact and practical, especially when driving a trip to bring a trip, very practical and convenient, be prepared.
200CC
With a capacity of 200CC, the pump can quickly fill gasoline power tools such as cars and lawn mowers in a short time.
Durable
Unique new exterior design, new flexible plastic production, more beautiful and durable, not inferior.
Convenient
As long as the gas pumping through the liquid can be aspiration, it is very convenient, so that all the liquid out, will not cause liquid retention in the container waste.
Endure acid alkali
Straw to endure acid, alkali hard plastic tube, pump body can not be bent, you can oblique a certain angle.
Multi-purpose
A variety of oils, water a few pumping, you can suck out the liquid.

Notes:
Cars with mesh screens cannot pump oil.
If the pipe inserted into the car cannot touch the oil, please do not buy this product.
Handle can only be up and down twitch (action to be moderate) can not be used by rotation.
If gasoline is used, please inject a little oil into the rod and the red pump body to keep the pump body lubricated before the second use.

Instructions:
1. Put one end of two red hoses F in two black fixing sleeves A respectively.
2. Insert the red hose F with fixed sleeve into the upper and lower ends of the red pump body C respectively, and then tighten it.
3. The red hose at the upper port (one end of the handle) of the pump body shall be inserted into the container for liquid output, and the red hose at the lower port shall be connected to the container for liquid injection as the outlet.
4. Pull the handle to fill the pump body with liquid, usually only need to pull 4-5 times to make the red hose liquid flow out can no longer pull the handle, the sucker will automatically siphon (this is suitable for high to low liquid).If you are pumping the liquid from the low position to the high position, pull the handle continuously until you get the required liquid capacity.
5: connect the black valve nozzle to the black thick tube E, which can be used as air pump.
6: insert joint B into the pump outlet, and insert thin black pipe D into joint B sleeve, which can be used for inflation.

Specifications:
Type: Manual Oil Pump
Quantity: 1pc
Material: Plastic
Color: Red
Pumping capacity: 200cc
Size:
1 suction pipe length: 1.3m/4.3ft
1 out of the oil pipe length: 1.3m/4.3ft
Tubing diameter: 8mm/0.3” Tubing diameter: 12mm/0.5”
1 plus long tube length: 1.2m/3.9ft
Extension tube diameter: 3mm/0.1” Extension tube diameter: 5mm/0.2”
Net weight: 500g/17.6oz

Package:
1* Pump
3* Pipe
1 gas nozzle
1 valve
3 connection socket